1Create existing machines with controller, HMI and firmware
Every machine type is recorded with its digital components, suppliers and the delivered version state, including machines that have been in the field for years.
Machinery placed on the market before 20 January 2027 remains under the Machinery Directive. Its technical file must be available for ten years, and every change to the controller, software or firmware raises the question of whether conformity still applies. ProductShield keeps inventory, versions and changes per machine type traceable.
The majority of machines in operation today were placed on the market under the Machinery Directive, and for these machines that remains the case after 2027. The obligations do not end with delivery: the technical file must be presented to the authorities on request, and the risk assessment and instructions must match the actual state of the machine.
This is exactly where the problem lies with machines containing software: firmware updates, new HMI versions, remote maintenance or retrofitted connectivity change the machine, often without the file being updated. If the change is substantial, a new conformity assessment is needed. Without a version history per machine type this question cannot be answered, and in case of damage or audits the evidence is missing.
Annex I requires a documented risk assessment across the entire lifecycle from which the protective measures are derived.
A fault in the hardware or software of the control system must not lead to hazardous situations (Annex I, 1.2.1). Software is therefore part of the safety assessment.
Description, drawings, risk assessment, applied standards and test reports must be available for ten years and be compiled on request.
Subsequent changes to the controller or software may constitute a substantial modification. The machine then counts as new and must be reassessed.
Every machine type is recorded with its digital components, suppliers and the delivered version state, including machines that have been in the field for years.
Firmware updates, retrofits and new software states are recorded as versions, with date, owner and reasoning. This makes it provable at any time what was changed when and why no substantial modification occurred.
Component list, risk decisions and version state are exported per machine type and supplement the technical file. At the same time this prepares you for the Machinery Regulation.
Your existing machines are documented as the Machinery Directive requires: complete, versioned and immediately available on request. And you see which machine types still have gaps for the transition to the Machinery Regulation.
ProductShield assists with technical structuring, risk analysis and documentation. A final legal assessment does not occur automatically and should be supplemented by specialised consultants or testing bodies if necessary. Information on deadlines and contents of the legal acts is provided without guarantee.
The EU regulation for the cybersecurity of products with digital elements: SBOM, vulnerability handling, reporting obligations and technical documentation across the entire lifecycle.
About this regulation →The new legal basis from 20 January 2027. For the first time with cybersecurity requirements for machinery, digital instructions and clear rules for substantial modifications.
About this regulation →